Saik0

14% ownership is ownership. Not just “big investor”. It’s not big enough ownership to pull unilateral changes, but when someone owns 14% of your company they do sit at the big boy table.

I’m not going to give you instructions simply because if you don’t know what you’re doing, you will brick your plex setup. Use the docker container given as a transparent proxy. You won’t brick anything that way.

HDHR isn’t getting keys

And yet mine does so somehow I’m special? I can open the streams just fine. No issues. In the other thread, I even linked you a project that does the ac4 transcoding. You think they’re also full of shit and that HDHR doesn’t work with ATSC 3.0?

The Siliconlabs guys even advertise the product as ATSC3.0 compatible… Are they full of shit too?

The decryption keys are on the HDHR itself… The HDHR calls home every few hours to pick up new keys.

That’s an ffmpeg issue. You can manually upgrade ffmpeg to the beta and it works fine. Or you can use an interposer like https://github.com/whichken/hdhr-ac4 to do it without touching plex itself.

So yes it doesn’t “support” it properly… but that doesn’t mean it’s not possible. Nor does that mean your antenna is useless.

Heh… I had a fun one yesterday (yes yesterday).

During the week they had a feature request to disable the “duplicate” warning on certain pages for entries that are invalid. We already do it on some pages simply for testing reasons (000000000 is always invalid but still accepted as dummy/test data)…

Yesterday: “We missed this duplicate because we instructed the user to put in the specifically invalid entry. We’re out a few hundred dollars now. Can we bill you for that?”

All I could do was copy and paste from the old email that it was literally their own request. Basically a nice “Pound sand”.

But to have the gall to request a feature change… Then to turn around and threaten to bill us for your dumb decision? Get the fuck outta here.

This makes an antenna useless. And the only digital boxes that are allowed are ones that have to be plugged into the TV directly with HDMI. This means you’d have to have an antenna and expensive converter box for EACH TV.

https://shop.silicondust.com/shop/product-category/atsc/?scrollto=663475

Weird that you’d say something like that when it’s completely untrue.

I have ATSC 3.0 channels in my plex setup right now…

I can’t imagine it’s survived this long in a dump

It likely didn’t even survive the truck that the trash was taken away in. The hydraulic crusher on those trucks can, and will bend the drive… shattering the platters inside.

This guy is dumb.

It may very well be. However, with how matter-of-factly you said it, some people might not think it’s a joke.

The microwave region extends from 1,000 to 300,000 MHz (or 30 cm to 1 mm wavelength).

Source: https://www.britannica.com/science/electromagnetic-radiation/Microwaves

2.4Ghz, and 5Ghz are microwaves. Your typical microwave oven operates at about 2.45GHz due to resonance frequency of water. 2.4Ghz wifi is literally a typical microwave’s neighbor.

The difference is sheer amount of power and shielding. Not the type of radiation.

I do not have full proper offsites… yet.

I run proxmox, so if it’s live on a server it’s probably on my ~70TB (really 40*2TB ssd) ceph cluster. Which makes 3 copies across the 5 boxes, so it’s more like 23TB of usable space for all my vms and such. The 400TB of storage is Truenas is really closer to 300TB after all the losses in raidz vdev and hot spares and what have you, there’s 30x 16TB SAS seagates in the box, of which 2 are hot spares and 7 are parity for raidz1… For things that are slow or linear loads (a movie file could be a good example of that type of workload!). Backups of the the proxmox boxes… and mass stored stuff, 99% of it I could easily obtain again if I had to. Although I’d probably be pretty flustered about it.

Truly important stuff gets written to 100GB bluray(s) (specifically m-disc blurays) and put in the safe. I do this probably about once a year or so…

My dad was in the process of setting up his own cluster that’s running 14TB drives rather than my 16TB… When he’s finally done I intend to requisition probably about half of his space for offsite storage (maybe more). I’m figuring about 100TB of space is what I’ll have there. Maybe more. He’s about 65 miles away from me, different electrical grid and all.

So the count as it stands now. Everything running has at least 2 copies on 2 mediums (ceph cluster, and spinning rust). My “linux iso” repositories only live on the spinning rust storage, but is low priority anyway. Super important highly sensitive shit lives on at least 3 copies and 3 mediums, although one of the mediums may be out of date and none is offsite… Though it’s rare I add to this category. There is plans for adding another copy of data, offsite on harddrive storage for most of my dataset as it is now.

Truenas usages:

And here’s Ceph

I have to really dislike something to delete it.

The velma tv show was the last item I just deleted.

But for me this is the same story. I’m up to 400TB… I’m just over half full. I’ve got plenty to go, and if I make to to 75-80% full, then I’m going to get me a 45 or 60 bay server and upgrade from my 36 bay one. 6 of the bays are wasted on SSD caching currently… Just finding a chassis that doesn’t waste the 3.5 inch bays on 2.5 drives would allow me to add a full vdev(another 100TB…).

Old chassis can be had on ebay relatively cheaply.